작성일 댓글 남기기

Juniper Router 설정

1. vlan 생성 (cli 모드 -> edit 모드) 
set vlans <vlan-name> vlan-id <vlan-id> (ex: set vlans v300 vlan-id 300) 

2. 인터페이스 설정(cli 모드 -> edit 모드) 
set interfaces <interface-name> unit 0 family ethernet-switching vlan members <vlan-id> 

set interfaces <interface-name> unit 0 family ethernet-switching port-mode trunk 

set interfaces <interface-name> unit 0 family ethernet-switching vlan members all 

juniper Configure Ethernet Ports for Switching 

http://kb.juniper.net/InfoCenter/index?page=content&id=KB16667&pmv=print

cli 모드에서 
show configuration | match ge-0/0/5 | display set 
하면 해당 인터페이스에 설정된 명세를 (description, port-mode, vlan member를 볼 수 있다) 
trunk모드로 전환해야 다수의 vlan 멤버가 될 수 있다.

출처 http://www.gossamer-threads.com/lists/nsp/juniper/18789 
juniper에서는 trunk 모드시에 untagged된 트래픽은 허용하지 않는 것이 기본 정책이기 때문에 이를 허용해야 하는 vlan 은 native-vlan-id로 설정해야 하고 native vlan id로 설정된 vlan은 member에 들어가면 않된다. 

http://www.juniper.net/techpubs/software/junos-security/junos-security10.2/junos-security-swconfig-interfaces-and-routing/topic-47671.html 
방화벽 설정 문서 (현재 edit모드에서만 작성해 놓음)


1. 외부 업링크 ip설정 

delete interface ge-0/1/3 unit 0 
set interfaces ge-0/1/3 unit 0 family inet address 211.xxx.xxx.xx/30 

2. vlan 생성 

set vlans vlan300 vlan-id 300 
… 
set vlans vlan315 vlan-id 315 


3. 트렁크 포트 생성 

set interfaces ge-0/0/5 unit 0 family ethernet-switching port-mode trunk 
set interfaces ge-0/0/7 unit 0 family ethernet-switching port-mode trunk 

4. vlan 할당 
set interfaces ge-0/0/5 unit 0 family ethernet-switching vlan members 300 
… 
set interfaces ge-0/0/5 unit 0 family ethernet-switching vlan members 315 

인터페이스 ge-0/0/7도 동일합니다. 


5. defalut vlan에 태그 생성 

set vlans default vlan-id 1 


6. 5번 7번 포트에 native vlan 설정 

set interface ge-0/0/5 unit 0 family ethernet-switching native-vlan 1 
set interface ge-0/0/7 unit 0 family ethernet-switching native-vlan 1 

7. vlan에 ip설정 

set vlans default l3-interface vlan.0 
set interfaces vlan unit 0 family inet address [GW IP]/24 

8. 게이트웨이 설정 

set routing-options static route 0.0.0.0/0 next-hop [ip] 

9. ssh설정 

set system service ssh root-login allow



출처: https://mashupworld.tistory.com/entry/Juniper-Router-설정 [People, Life, Story]